Will Fascia Still Line Up with Other Panels After Installing a Trailer Hitch on a 2018 Honda Accord

Updated 04/03/2018 | Published 04/01/2018

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

(22)

$218.61

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(11)

$88.45

Question:

Nice looking hitch, directions are clear. Since hitch mounting plate is sandwiched between bumper beam and body will rear fascia still line up properly with body panels after installation ? i.e. gap ?

asked by: Coy R

Expert Reply:

Yes, the rear fascia will still line up with other panels after installation of the Curt trailer hitch # C11525 on your 2018 Honda Accord. There is enough space in the stock set up to allow for the hitch to fit without compromising the fit of the fascia relative to the other panels.

If you tow the recommended ball mount is # 3593 and you can use 1-7/8 inch ball # 19256 or 2 inch ball # 19258. For trailer wiring you can use # C56402 to add a 4-Way connector to the rear of the vehicle.

expert reply by: Michael H