Trailer Tire Recommendation for Size 16x6.50-8  

Your 6-1/2-inch wide mower tires are a 165mm width in metric terms and in a wheel/tire of this size with the 4-bolt lug pattern we offer Kenda #AM3H200 which is size 165/65-8. This is our only pre-mounted wheel tire with this tire size. This is NOT a…

We have just what you need. The part #AM3H200 has the tire size you need of 16x6.50-8 and is mounted to a rim with a 4 on 4 inch bolt pattern. If instead you need a 5 on 4-1/2 inch bolt pattern you would want the part #AM3H240.

You are absolutely correct that the two different tire sizes, 16.5x6.5-8 and 165/65-8, are in fact the same size, the latter being the modern metric designation. The part you referenced, Kenda #AM3H200, is a 165/65-8 bias-ply tire/wheel with a…

The correct replacement step control module for your SCS/Frigette Coach Steps Model 202-3207 is the Replacement Control Module for Lippert Electric Coach Step part #LC301702.

To install the Thule Hull a Port Pro on Thule Aeroblade crossbars requires the use of the #THXADAPT11 that you mentioned. Otherwise it would not fit on the bars.

I checked with Thule and the Motion XT Rooftop Cargo Box #TH629706 referenced in your question will mount without issue onto the factory crossbars of your 2018 Chrysler Pacifica. I am not sure of the exact length for the factory bars on your vehicle,…

A lot of people use trailer hitches to carry bike racks or cargo carriers which is why we offer trailer hitches for vehicles like your 2019 Volkswagen Golf Alltrack like the Draw Tite part #24949. When you install an aftermarket part on your vehicle…

The most common spare tire carrier we recommend for horse trailers is the part #413200. This carrier can get welded on to your trailer basically wherever you need it to be. I attached a review video for you to check out as well.

The transmission coolers that we carry are meant as supplemental coolers to the factory cooler though some people do decide to bypass the factory cooler for any number of reasons. The term tow package means different things to different manufacturers…

Your hitch pin hole on your hitch receiver #75673 is about 5 inches from the outer part of your bumper. The Curt Ball Mount #D-26 you mentioned measures 12-5/8 inches from the center of the pin hole to the center of the hitch ball, so that would be…

Reverse lockout solenoids do not draw very much amperage at all so the #20036 attached to your reverse light circuit wouldn't be a problem.

For your 4Runner the Malone AirFlow2 Roof Rack - 58" Long #MPG216 would be a great fit. This roof rack attaches to the raised side rails on the cab of your truck and includes locks to help secure it and prevent theft.