Recommended Vehicle Suspension For Front And Rear Of Fleetwood Bounder RV  

Question:

Expert Reply:

For your 2014 Fleetwood Bounder The SumoSprings Rebel Custom Helper Springs # SSF-170-40-2 are recommended for the front. Your Fleetwood Bounder RV has a GVWR of 22,000lbs. These springs are made for models ranging from 16,000 to 22,000 lbs. These springs will mount both on top and bottom but are not connected. They will absorb the road shock, but will also allow full axle movement so you will have the best steering ability and traction.

For the rear, I recommend the SumoSprings Maxim Custom Helper Springs # SSR-187-54-1. These springs will attach at both the top and bottom to restrict movement and help control body roll. They will help level your ride working independently and will minimize sway. These are designed for vehicles with a GVWR between 20,000 and 26,000 lbs, so they will be a perfect fit for your motorhome. There is drilling required for installation and it bolts between the frame and the top of the spring pack.

This combination for the front and rear will give you noticeable difference in the ride of your motor home. The product is designed to enhance load carrying ability, stabilize sway, and improve overall driver control and comfort. They require no maintenance and are an easy installation. Let me know if you have questions about this recommendation or any other products.

For the sway bars, for the rear I recommend # RM-1139-149, for the front # RM-1139-148. There is no drilling required for installation. Check to ensure there is enough factory u-bolt available to accommodate the factory nut, washer and 1/2" plate. If the u-bolts are not long enough, the # RM-590050-00 u-bolt replacement kit is needed. You will need at least 3 threads showing after installing the rear sway bar then the factory u-bolts need to be changed out for the extended u-bolts.

Then finally a steering stabilizer will be a huge help in regards to the control of your towing system. I recommend, Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Class A Motor Homes # RM-RBK22-RSSA. The sturdy steel spring on this stabilizer keeps your vehicle in line by constantly working to maintain its position. Mount it between the steering mechanism and the chassis for a tight connection that will minimize wander and correct over-steering. There is no drilling required for installation.

expert reply by: Timothy G

0