Recommended Trailer Hitch Ball Mount for a 2014 Toyota Sienna Using Curt Hitch # 13105

Updated 01/29/2018 | Published 01/27/2018

Question:

Im wondering what you recommend for the hitch ball mount for a Toyota Sienna 2014 to be used with a Curt trailer hitch part number c 13105

asked by: Adam

Expert Reply:

Since the Curt trailer hitch receiver, part # C13105, sits pretty low on your 2014 Toyota Sienna you probably are going to need a ball mount with a rise. Something like the Draw-Tite, part # 2753, which has a 2-3/4 inch rise. Or you can get the kit that includes both 1-7/8 and 2 inch hitch balls, a pin and clip, and storage bag, part # EBMK4.

The best way to determine exatly how much rise you need out of a ball mount is to measure from the ground to the inside top of the receiver tube on the hitch. When we installed the hitch we measured it at 10-1/2 inches. Then measure from the ground to the underside of your trailer's coupler. Then find the difference. I've linked an article that explains this in more detail.

Also, if you need a wiring harness for your van I recommend part # 118498 which plugs in behind both tail lights. Then you need to run a power wire up to the van's battery.

I've linked some install videos of the hitch and wiring for you as well.

expert reply by: Charles S