Parts Needed to Flat Tow 2009 Mini Cooper S56  

Question:

Expert Reply:

According to the owner's manual for the 2009 Mini Cooper it can be flat towed. There are a number of parts you're going to need in order to do this, starting with compatible base plates. I recommend the Roadmaster EZ Base Plate Kit # 521877-1, which will work with S models of the Mini Cooper so long as it does not have the Sport suspension or John Cooper Works. For a tow bar I recommend going with the Roadmaster Falcon 2 Tow Bar # RM-520; you will also need safety chains # RM-643.

For wiring that will allow your Mini's lights to function while being towed you can use the Roadmaster Tail Light Wiring Kit with Bulbs # RM-155. A supplemental braking system is a requirement in most states and I highly recommend the SMI Stay-IN-Play # SM99251 for this. This is a proportional braking system which is a one-time install which you can leave in so you'll never have to activate or deactivate it. You will need to use Roadmaster Stop Light Switch Kit # RM-751440 along with your supplemental braking system.

Finally, it is likely you will need a high-low adapter such as # RM-076 to keep your Mini level with your tow vehicle. The adapter you need is going to depend on some measurements you'll need to take. I have added a link to a help article on high-low adapters which explains the measurements you'll need, as well as a link to our page with our selection of adapters. I've also attached links to video reviews of the other aforementioned parts for you to take a look at.

expert reply by: Kyle S

0