Parts Needed to Convert Electric Brakes to Hydraulic Drum Brakes on Kaufman Trailer
Published 12/20/2017
Products Featured in This Question
Question:
I need the complete system for hidraulic brake foe my trailer 2017 Kaufman trailer covert from elwctric to hidraulic brakes. 10 k axels 12-1/4 x 3-3/8
asked by: Pedro
Expert Reply:
We do have everything you need to convert the electric brakes on your trailer to hydraulic drum brake assemblies. I have attached a great article that will walk you through everything that is needed to make this conversion.
For the brake assemblies themselves, we do have one kit available in the 12-1/4 x 3-3/8 size you are needing for 10,000 pound axles. The Dexter Hydraulic Drum Brake Kit # 23-410-411 includes both the Left Hand and RIght Hand assemblies and features a 7 bolt mounting flange pattern. It is compatible with 15 inch or larger wheel sizes. If you need mounting hardware you can use # BRKH122510.
In addition to the brake assemblies, you will also need a brake actuating coupler along with brake lines and flexible hoses. I have attached a link that will take you to our available selection of hydraulic drum brake actuators that you can look through. You will want to choose one that has a capacity that matches or exceeds the weight of your trailer. I have also included a link that will take you to our selection of brake line kits, such as the HydraStar Hydraulic Brake Line Kit - Tandem Axle # HS496-252. This kit is designed for tandem axle trailers and will let you run brake fluid from the actuator to the brakes.
Product Page this Question was Asked From
Dexter Hydraulic Trailer Brakes - Duo Servo - 12-1/4" - Self-Adjusting - Left/Right - 9K to 10K
- Trailer Brakes
- Hydraulic Drum Brakes
- Standard Grade
- Dual Servo
- Self Adjust
- 12-1/4 x 3-3/8 Inch Drum
- 9000 lbs Axle
- 10000 lbs Axle
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Can Curt Tow Bar be Used with Blue Ox Base Plate Kit
- Q&A: How To Determine Correct Leaf Spring Hanger Spacing for the Dexter Heavy Duty Suspension Kit
- Q&A: Oil Bath Hub Oil Cap for Pre 1996 Quality Axles 3-1/2 x 14 Thread Pitch
- Q&A: What Causes Trailer Suspension Equalizers to not Sit Level
- Q&A: Replacement Brakes, Hubs and Drums For Dexter 10K General Duty Prior To July 2009 With 9-44 Drums
- Q&A: Replacement Brake Assemblies for Dexter Trailer Hub 9-44
- Q&A: How to Install the Factory Ford Puck System on a 2007 Ford F-350
- Article: Parts Required to Add Electric Over Hydraulic Drum Brakes to a Trailer
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Stability Control for Heavy Duty Vehicles
- Article: What To Look For When Buying Ratchet Straps