Bolt Hole Dimensions for Installing the Curt Trailer Hitch # C13206 on a 2014 Subaru Outback Wagon

Published 12/06/2017

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

(410)

$216.11

Curt Cam Buckle Stabilizing Strap for Hitch-Mounted Accessories - 61" x 1" - Qty 1

(666)

$15.93

Question:

Hi, I considering changing the 1.25 inch hitch on my 2014 Subaru outback with the 2 inch Curt on your site C13206 Can you please tell me the distance between centers of the bolts, so I can check if it matches the one I already have I would like to avoid drilling another set of holes. thanks,

asked by: Anthony D

Expert Reply:

The Curt Trailer Hitch Receiver # C13206 is a custom fit trailer hitch that has been confirmed to fit your 2014 Subaru Outback Wagon. However, I did go out to the warehouse to get the measurements that you asked about for peace of mind.

The bolt holes furthest away from the receiver opening measure 32-1/2" apart on center, and the bolt holes closest to the receiver measure 33-1/4" on center. From the back set of holes to the front set is about 8" on center. I have attached a photo for demonstration.

I have also attached an installation video on a similar 2014 Outback Wagon that you can reference. Please note that although it is a custom fit, access holes may need to be enlarged by drilling, filing, or rotary tool.

If you plan on using this trailer hitch for any non-trailer loads, like a bike rack or cargo carrier, you will need to use a support strap, like part # 18050, to comply with the Curt warranty.

expert reply by: Jon G