Available Tires and Wheel/Tire Products in Size 5.70-8
Published 11/15/2017 >
Products Featured in This Question
Question:
Morning, do you sell wheel and tires in the size of 5-70-8 solid tire. I tried the Garlis Le USA trail tire and they truly dont last.
asked by: John N
Expert Reply:
We do offer pre-mounted combination wheel/tire products and also tires only in the 5.70-8 size you referenced. All of these items use pneumatic tires that inflate to a particular psi pressure, using a standard Schrader valve like those on car tires. We offer no solid tires for your requirement.
These tires will use psi pressures of either 50-, 75- or 100-psi in order to reach their maximum rated weight capacities and will fit on a wheel that measures 8 x 3-3/4-inches. Pneumatic tires will typically give a smoother ride than a solid tire.
If you prefer a combination wheel/tire product like # AM30120 please note the we offer such items in a choice of wheel bolt pattern, the 4-on-4 bolt pattern as with the item I mentioned, but also the 5-on-4-1/2 bolt pattern as with Kenda part # AM30100.
Please note that if you do choose to switch to inflatable pneumatic tires that these should ALWAYS be inflated to the cold psi pressure rating that is indicated on the tire sidewall. It is never appropriate to under- or over-inflate one of these special trailer-type tires.
Product Page this Question was Asked From
Kenda 5.70-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range C
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range C
- 5.70-8
- 8 Inch
- K - 65 mph
- 4 on 4 Inch
- Steel Wheels - Powder Coat
- Kenda
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Loadstar 5.70-8 Bias Trailer Tire with 8" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Shop: Kenda 5.70-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range C
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Kenda Loadstar K371 Bias Trailer Tire - 4.80/4.00-8 - Load Range B
- Video: Detailed Breakdown of the Curt QuickPin No Latch A-Frame Trailer Coupler w/ Jack Hole
- Q&A: Replacement Size 5.70-8 Trailer Tires
- Q&A: 5.70-8 Trailer Tire & Wheel With 5 on 4-1/2" Bolt Pattern Combo
- Shop: Curt QuickPin No Latch A-Frame Trailer Coupler w/ Jack Hole - 50 Degree - 2-5/16" Ball - 14K
- Q&A: Is It Important for Hub Pilot and Wheel Pilot Diameter to Match
- Q&A: Replacement 5.70-8 Wheels and Tires for Trailer With 4 on 4 Inch Bolt Pattern
- Q&A: What Holds the Weight of a Trailer Wheel, the Studs or the Pilot Hole
- Q&A: How to Determine the Right Air Pressure to Fill a Trailer Tire
- Q&A: What is the Pilot Diameter on a Wheel



