Is There a Weight Capacity on CE Smith Fold-Up Wheel Chocks

Question

Question:

They look pretty small, Whats the weight limit on these?

asked by: Neal M

0

Expert Reply:

I spoke with my contact at CE Smith regarding the Fold-Up Wheel Chocks # CE32600 referenced in your question. She stated that these do not actually have a listed weight capacity, as they are designed and sturdy enough to be used on any RV or trailer tire. You do not have to worry about these being overloaded as long as they are used correctly.

The sturdy chocks can be used as a pair to secure the front and back of a single tire. They measure 4-1/4 inches wide, 5-1/4 inches long, and 4 inches tall. I have attached a short video demonstration on this product that you can also check out.

expert reply by: Chris R

0

Answer 1

The overall outside to outside dimensions of the MORryde Sliding Tray for RV Cargo Compartment #MR84FR is 90 inch by 20 inch.

view full answer...

Answer 2

Hey Christie! Yes, the Furrion Vision S+ Wireless RV Observation System w/ 3 Cameras #FR64AD will fit that mount on your camper. You're prepped for Furrion, and that mount works for both the Vision S and Vision S+. Since the S+ is the newer…

view full answer...

Answer 3

My contact at Curt Manufacturing advised that they do not offer the replacement Wire Lock Lynch Pins (shown as part number 10 in their instructions, which are linked) that secure their TruTrack's trunnion bars at the head end but he said…

view full answer...

Answer 4

My contact at Atwood recommended using a pin at least 3/8 in diameter and 2-3/4 inches long. I'd recommend using a snapper pin, part #JFC-PN which has those dimensions.

view full answer...

Answer 5

I went out to the warehouse and pulled Pins and Thumb Clips #EQ95-01-9415 to measure them for you. The diameter is 3/8 of an inch. The usable length is just under 2-1/2 inches (2.45 inches). And the opening is 2.46 inches by 1.5 inches.

view full answer...

Answer 6

We offer 3/8-inch diameter Replacement Snapper Pin #JFC-PN whose measurements are noted in the photo I linked for you. This item matches the original; I confirmed by going to our warehouse and measuring the pin included with your Husky Super Brute…

view full answer...

Answer 7

In order to recommend the correct replacement, I'll need to know whether you're looking for an idler hub (no brakes) or a hub/drum. I'll also need to know the reference numbers from the inner and outer wheel bearing. If you can't find…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 11

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 12

Good question, Dave. The easiest way is to match the RVpaws kit to your jack leg or leveling system. For example, there are specific kits for the brands and lineups out there: Standard 2" round jack leg = #RV57FR Standard 2" square jack leg…

view full answer...

Is There a Weight Capacity on CE Smith Fold-Up Wheel Chocks

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching