Which End Faces Forward When Installing a Slipper Spring
Published 10/04/2017
Question:
Open eye leaf forward or in the rear also can or should shackles be used
asked by: Mike
Expert Reply:
When installing a slipper spring, like the 2-Leaf Slipper Spring # e29SR, you will install it so that the end with the eye is oriented towards the front of the trailer and the open end is facing the rear part of the trailer.
You will need to use hangers when installing slipper springs and avoid shackle straps. Since one end of the slipper spring is open and not "fixed" it will not sit properly if shackle straps are used.
I have attached a helpful article that goes into detail about what parts are needed and how to install slipper springs.
Product Page this Question was Asked From
2-Leaf Slipper Spring w/ Flat End for 1,800-lb Trailer Axles - 30" Long
- Trailer Leaf Springs
- Slipper Springs
- 9/16 Inch Eye
- Nylon Bushings
- 1800 lbs
- 1-3/4 Inch Wide
- 2 Leaf
- 30 Inch Long
- Standard Grade
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Review of CE Smith Trailer Leaf Springs - Slipper Springs - CES73JR
- Shop: CE Smith 24-5/8" Slipper Leaf Spring - 250 lb Load - 1-3/4" Wide - Single Leaf - Steel
- Search Results: trailer leaf springs
- Search Results: 20400
- Search Results: equalizers
- Video: Breaking Down the Lippert Universal Slide Out Wear Pad
- Q&A: What Is The Difference Between The Hydrastar Disc Brake Kits HYD44VR and HYD74VR?
- Search Results: trailer fenders
- Search Results: trailer breakaway kit
- Search Results: trailer breakaway cable
- Shop: Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Shop: Zinc Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Shop: Lippert Universal Slide Out Wear Pad
- Shop: Shackle Bolt for 1-3/4" Wide Double Eye Springs - 9/16" Bolt Diameter - 3" Long
- Shop: CE Smith U-Bolt Kit for Mounting 1-1/2" Square Trailer Axles - 3-3/8" Long U-Bolts - Zinc
- Article: Slipper Spring Trailer Suspension System Review
- Shop: Dexter Zinc-Plated Straight-Tongue Coupler - 21,000 lbs
- Q&A: Converting Shorelandr Boat Trailer from Slipper Spring to Double Eye
- Video: Review of Hydrastar Trailer Brakes - Tandem Axle Disc Brake Kit with Actuator - HYD44VR
- Video: Breaking Down the Angle Trim for Enclosed Trailer
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Wiring Diagrams for Hydrastar Electric Over Hydraulic Trailer Brake Actuators
- Video: etrailer Rust-Resistant 4-Leaf Slipper Spring for 4,300-lb Trailer Axles Review
- Video: In-Depth Review of the CE Smith Trailer Idler Hub Assembly w/ Case for 2.7K Axles
- Video: Feature Breakdown: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles
- Q&A: Any Leaf Springs Designed for Boat Trailers Used in Salt Water
- Q&A: Replacement Hubs for 2,700 lb Axle
- Search Results: straight equalizer
- Q&A: Can 5-3/4 Inch or Similar Size Equalizer Replace 7-3/4 Inch Equalizer
on Trailer Leaf Springs
