Replacement 32 Inch Leaf Springs for Trailer
Updated 10/03/2017 | Published 10/02/2017 >
Question:
32inch eye to eye trailer spring 4 leaf 3/4wide with 1/2inch eye let bolt holes availability?
asked by: AL Y
Expert Reply:
The closest leaf springs we have available to the specifications you mentioned is the Universal Group 4-Leaf Slipper Spring # SP-040275. These slipper springs have a 30 inch length from the center of the spring eye to the end of the spring. Leaf springs will stretch over time, so it's possible that the leaf springs on your trailer originally had a length closer to 30 inches.
These are designed for axle capacities of 3,700 pounds and have a width of 1-3/4 inches. The eye diameter with bushing is 9/16 inch. You will want to take note of the axle capacity on your trailer to ensure a proper replacement leaf spring stack.
I have attached a short video demonstration on this product that you can check out. I have also included a link that will take you to our available selection of trailer leaf springs. You can use the facets on the left side of the page to filter through different lengths and capacities.
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 4 lug hub assembly
- Shop: 4-Leaf Slipper Spring w/ Flat End for 3,700-lb Trailer Axles - 30" Long
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Video: In-Depth Review of the 4-Leaf Slipper Spring w/ Flat End for 3,700-lb Trailer Axles
- Q&A: Tips for Determining Square Trailer Axle Capacity
- Q&A: Trailer Axle Weight Rating for 2 Inch Square Axle
- Video: All About the Trailer Idler Hub Assembly for 2,000-lb Axles
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Pre-Greased
- Shop: 3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles - 24-5/8" Long
- Shop: CE Smith Deep V Keel Roller Assembly for Boat Trailers - Galvanized Steel and Yellow TPR - 8"
- Shop: Bow Roller Assembly w/ Bells for 3" Wide Bracket - TPR - 1/2" Shaft - Yellow
- Q&A: Recommended Idler Hub Assembly for 1-1/16 Inch Diameter Spindle With Seal 1-1/4 Inches at Spindle
- Q&A: How to Correctly Position Oil/Grease Seal in Trailer Hub
- Q&A: 30 inch Long Slipper Spring Recommendation for Boat Trailer
- Q&A: Replacement Leaf Springs for 1989 TeeNee Boat Trailer
- Q&A: How Much of a Slipper Spring Should be Sticking Out Past the Rear Hanger
- Shop: CE Smith U-Bolt Kit for Mounting 2" Square Trailer Axles - 4-1/2" Long U-Bolts - Zinc
- Video: In-Depth Review of the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles
- Video: Let’s Check Out the Washer For 1" Spindle
- Video: In-Depth Review of the Replacement Race for L44643 and L44649 Bearings
- Video: Feature Review 2" Square Trailer U-Bolt (Qty 2)
