Hardwiring a Trailer Connector on a 1997 Dodge Ram to Power Trailer Lights and Brakes
Updated 09/14/2017 | Published 09/13/2017 >
Products Featured in This Question
Question:
Cant figure out how to get a 4 flat hook up to my Dodge Ram 1997 1500 just from a hardwired into the wires how do I get the brakes to work
asked by: James L
Expert Reply:
To hardwire a 4-way you'll need to use a circuit tester, like part # PTW2993, to find the correct wires on your truck by function. One the 4-way you have picture the color code is white for ground, green for right turn and right brake lights, yellow for left turn and left brake lights, and brown for running lights. The brake lights and turn signals are combined.
We do carry a plug and play wiring harness for your 1997 Dodge Ram. Part # 118329 plugs into connectors at the rear of the truck along the inside of the frame rail on both sides.
If you're trying to power the trailer's brakes, then you'll need a 7-way trailer connector. For this use your # ETBC7 kit once you have the 4-way installed. This kit converts the 4-way to a 7-way and includes everything else needed to install a brake controller. If you need a brake controller as well, I recommend the Prodigy P3 # 90195 because of how reliable and easy to use it is.
I've attached link on wiring, as well as some videos you might find helpful.
Product Page this Question was Asked From
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: How to Install a 7-Way Trailer Connector on a 1997 Dodge Ram 1500
- Article: Trailer Wiring Diagrams
- Q&A: How to Test Brake Controller without Trailer Connected
- Q&A: Recommended Bike Rack and Dual Hitch Adapter for Carrying E-Bikes While Flat Towing
- Q&A: Recommended Flat Tow Setup for a 2026 Ford Maverick
- Q&A: Looking for Replacement Hydraulic Gear Pump 196895
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Trailer Turn Signals Both Blink when Just Left Turn Signal is Activated
- Article: Brake Controller Installation: Starting from Scratch
- Article: Brake Controller Installation for 2007 (New Body Style) - 2013 GMC Sierra and Chevy Silverado
- Article: Installing an Electric Brake Controller on 2007-2013 GM Full-Size Truck or 2007-Present GM SUV
- Q&A: Troubleshooting Right Side Trailer Lights Not Working, Left Side Working Correctly
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Ugly RV Makeover: How to Change Outdated RV Lighting






