Recommended Light Fixtures for 1992 Winnebago Brave Motorhome
Updated 09/12/2017 | Published 09/10/2017
Question:
Hi, I have a 1992 winnibago brave motorhome.. I want to replace all the wall and ceiling lights. it seems ours have a 3 wire system and everything I see now is 2 wire. well, at least the wall sconce lights are 3 wire. are there specific lights I should be looking at?
asked by: Tony
Expert Reply:
As you mentioned, most of our motorhome light fixtures have a 2 wire system versus a 3 wire system. If you are connecting the two wire systems, you will only connect the black wire to power and the white wire to ground. Most likely that 3rd wire is just another secure ground, but I recommend using a circuit tester like # PTW2993 to confirm.
I've attached the link to all of our options.
Product Page this Question was Asked From
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Article: Trailer Wiring Diagrams
- Q&A: How to Test Brake Controller without Trailer Connected
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Trailers Right Tail Light Stays on Even While Unplugged
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Recommended Warm White 4-1/4" Diameter Puck Light
- Q&A: Troubleshooting Right Side Trailer Lights Not Working, Left Side Working Correctly
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Can I Use a 4 Way Vehicle Connector with 7 Way Adapter and the Curt Echo Brake Controller?
- Q&A: Troubleshooting Blown Vehicle Fuses Every Time Trailer is Connected
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Trailer Lights Not Working After Winter? Test Truck or Trailer