Locating Brake Switch Wire on 2016 Mazda CX-9
Updated 08/16/2017 | Published 08/15/2017
Question:
Im trying to hook up a brake controller to my 2016 mazda CX9, and I dont know which wire to tap into the brake switch, there are 3 wires into the switch. Can you tell me which one? Thanks
asked by: Ifti
Expert Reply:
To locate the correct brake switch wire on your 2016 Mazda CX-9, you will need to use a circuit tester like # PTW2993 to test each of the 3 wires you mentioned in your question. You are looking for the wire that shows power only when the brake pedal is depressed and not for any other function like turn signals or running lights.
I was not able to locate what color this wire might be in your Mazda CX-9, however testing the wires is still the best method as vehicle manufacturers tend to change the wire colors they use. With this in mind, going by color is not typically the most reliable option.
Product Page this Question was Asked From
Continue Researching
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Article: Trailer Wiring Diagrams
- Q&A: How to Test Brake Controller without Trailer Connected
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Trailers Right Tail Light Stays on Even While Unplugged
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Recommended Warm White 4-1/4" Diameter Puck Light
- Q&A: Troubleshooting Right Side Trailer Lights Not Working, Left Side Working Correctly
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Can I Use a 4 Way Vehicle Connector with 7 Way Adapter and the Curt Echo Brake Controller?
- Q&A: Troubleshooting Blown Vehicle Fuses Every Time Trailer is Connected
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Trailer Lights Not Working After Winter? Test Truck or Trailer