LED Trailer Clearance Lights are Dim on One Side of Trailer
Updated 04/26/2011 | Published 04/24/2011 >
Question:
the led lights are dim on one side bright on the other, but operate like they should.
asked by: Steven P
Expert Reply:
I would recommend checking the running light circuit on your trailer. Specifically, check out the point where the circuit splits to run down each side of the trailer. I would be willing to bet that the 'leg' of the connection that runs down the side of the trailer where the lights are having issues is not completely secure.
I would also recommend checking the ground connection point on the trailer. This is usually found on the trailer tongue. Make sure that this connection is securely made to clean metal. Make sure that each lamp is grounded to the trailer frame.
If this does not correct the problem, get back with me and we will look into other possibilities.
Product Page this Question was Asked From
Piranha Slim-Line LED Mini Clearance or Side Marker Light - Submersible - 2 Diodes - Amber Lens
- Trailer Lights
- Clearance Lights
- Marker
- Oval
- Surface Mount
- Submersible Lights
- LED Light
- 2-5/8L x 3/4W Inch
- Amber
- Peterson
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Bearing Kit for a # 42 Spindle on a 8,000 lbs Axle
- Q&A: Replacement Door Hinges for a 1990 Sooner 2H Slant Horse Trailer
- Q&A: Parts Needed To Add Electric Drum Brakes To A Flatbed Utility Trailer
- Q&A: Correct Replacement for Dexter Leaf Spring 072-078-00
- Q&A: Brake Pads For Kodiak 250 Calipers
- Article: How to Replace or Install an RV Roof Vent
- Q&A: Solution for Damaged Elixir Roof Vent Gear
- Q&A: Is it Normal for Super Springs Suspension Stabilizers to Be Noisy on Bumpy Uneven Roads
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Lighting Requirements
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: How to Mount a Truck Bed Camper


