Difficulty Installing Optronics Market Light MCL157AB and Grommet A55GB in Bracket BK55BB

Updated 08/02/2017 | Published 07/31/2017

Products Featured in This Question

Rubber Grommet for 2-1/2" Round Trailer Lights - Flush Mount - Open Back

(116)

$5.80

Heavy-Duty Metal Mounting Bracket for 2-1/2" Round Clearance Lights

(24)

$4.84

GloLight LED Trailer Clearance or Side Marker Light - Submersible - 9 Diodes - Round - Amber Lens

(124)

$10.79

Question:

I purchased 2 BK55BB, 2 A55GB, and 2 MCL157AB. Ive mounted the 2 brackets and have tried to install the grommet and the light in many different fashions. First I installed the grommet into the bracket and then tried to squeeze the side marker light in, but that doesnt fit. Then I put the light into the grommet and tried to install the grommet into the bracket. I tried both from the front and from the rear, but Ive been entirely unsuccessful. What am I doing wrong? I have not tried to use any tools or anything, this is all with my hands. Ive thought about using a flat blade screw driver to pry the grommet into place, but I dont want to damage the grommet. Any insight you can provide would be awesome. Thanks in advance!

asked by: Travis L

Expert Reply:

You are not alone! The lights # MCL157AB have to fit tight in the grommet # A55GB and the grommet in the bracket # BK55BB so there is very little tolerances. One thing that I have had success with is to put the light in the grommet and then push both into the bracket together.

Another tip that usually does the trick is to use some soapy water on the outside of the grommet to help it slip into the bracket.

expert reply by: Michael H