Sway Control and Weight Distribution for 2000 Jayco Kiwi 17A
Published 07/31/2017 >
Products Featured in This Question
Question:
What type of sway control would you recommend for towing a 2000 Jayco Kiwi 17A with a 2008 Silverado 1500, 4x4, extended cab and 6.5foot bed?
asked by: Donald
Expert Reply:
According to my research, your 2000 Jayco Kiwi 17A has a dry weight of 2,375 lbs and a maximum loaded weight of about 3,300 lbs. However, it's best to confirm the weight by measuring the loaded tongue weight on your trailer using a tongue weight scale like item # e99044. Your maximum tongue weight is usually 10%-15% of the loaded trailer weight, plus the weight of anything loaded behind the rear axle of the towing vehicle. Knowing your trailer's tongue weight will allow you to choose the best weight distribution/sway control system for your towing needs. I've attached a helpful article on determining your tongue weight.
For a weight distribution/sway control system that is compatible with a 2-inch hitch and is rated for a tongue weight between 200-600 lbs, I recommend the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 6,000 lbs GTW, 600 lbs TW, Item # EQ37060ET. This system includes 4-Point Sway Control to limit the side-to-side movement of the trailer, no-drill clamp-on brackets that can be adjusted along the trailer frame, and spring bars for a smooth, controlled ride. This system is compatible with electric and surge brakes. The 2” hitch ball and adjustable shank are included, although the Thin Walled Socket for Equal-i-zer Hitches, Item # EQ70-00-4800, is recommended for hitch ball installation.
I've attached a useful article on choosing a weight distribution system with sway control. I've also included video reviews of both weight distribution systems for you to check out.
Product Page this Question was Asked From
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 6,000 lbs GTW, 600 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Trunnion Bar
- Fits 3 Inch Frame
- Fits 4 Inch Frame
- Fits 5 Inch Frame
- Fits 6 Inch Frame
- Includes Shank
- Top-Mount
- Fits 2 Inch Hitch
- Allows Backing Up
- 400 lbs
- 500 lbs
- Equal-i-zer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Availability of 2-5/16" Ball for Andersen Weight Distribution Hitch
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Recommended WeighSafe Weight Distribution Hitch for a 25 Ford F250 Towing a 26 Grand Design Mav
- Q&A: Should I Run the Spacer with the Timbren for 2025 Toyota Tundra
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Weight Distribution Recommendation for 2026 Jayco Feather 19MRK
- Q&A: Weight Distribution Recommendation for NOBO 19.8 22' Trailer
- Q&A: Will The Curt TruTrack 2P Weight Distribution System C69JR Work With 2026 Jayco FLIGHT SLX 170BH?
- Q&A: Comparison of Fastway and Equal-i-zer Weight Distribution Systems for 3,000 Pound Trailer
- Article: How to Measure for Trailer Hitch Drop
- Article: Determining Trailer Tongue Weight
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Top Weight Distribution Hitches for a Buttery Smooth Ride





