Replacement Axle for 1988 StarCraft Nova Tent Trailer

Updated 06/21/2017 | Published 06/20/2017

Products Featured in This Question

Dexter Trailer Axle Beam with Standard Spindles - 60" Long - 2,000 lbs

(159)

$154.83

Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased

(400)

$86.95

Timbren Axle-Less Trailer Suspension - Heavy Duty - No Drop - 4 Bolt Flange - 2,000 lbs

(167)

$855.85

Question:

I need a replacement axle assembly for a 1988 StarCraft tent trailer Model: Nova weight:1350 lbs Axle Mfg: Dexter Type: rubber torsion axle, 2000 lb axle, no brakes attaches to trailer frame with 2 bolts on each side through a triangular plate welded to the axle

asked by: Robert P

Expert Reply:

We do have a couple of 2,000 pound leaf spring suspension axles available, such as the 60 Inch Dexter Trailer Axle Beam # T20BTR-6048 with standard spindles.

When replacing the axle on your 1988 StarCraft Nova Tent Trailer, you will need to measure the hub face to hub face dimension as well as the spring center to spring center distance. I have attached an image that shows these dimensions on this particular axle. The hub face (A) refers to the length of the axle measured form the base of one wheel stud to the base of the wheel stud on the opposite side (when hubs are mounted). The spring center (B) will be the approximate width of the trailer. It is measured from the center of the spring seat to the center of the spring seat.

If you cannot find a standard axle with the needed dimensions, another option is an axle-less system like the Timbren # ASR2KHDS01. This 2,000 pound capacity system will fit any frame width and the two independent units can eliminate the need for a thru axle. Compatible Idler Hub Assemblies can be added with # 84545UC1-EZ.

I have attached a video demonstration on this system so you can get a better idea as to how it works.

expert reply by: Chris R