Base Plate and Tow Bar Recommendations to Flat Tow a 2009 Jeep Wrangler  

Question:

Expert Reply:

The Roadmaster XL Base Plates, # 1429-1, are the correct fit for a 2009 Jeep Wrangler with no aftermarket bumper, winch, or guard. As long as your Jeep falls into that category, the base plates are a fit. The RM-585 is a version of the tow bar you have referenced, but this tow bar is designed for Blue Ox base plates. Instead, you would need the RoadMaster Sterling All Terrain Tow Bar, # RM-576, to be compatible with the Roadmaster base plates.

This tow bar comes with safety cables and wiring, so you would just need to have the vehicle wired and a supplemental braking system as required by law. For lights, there are a couple of options. If you do not plan on towing the Jeep often, I recommend magnetic light kit # RM-2120. If you do plan on towing it frequently, I recommend installing diodes, # 38955. I have included a video along with a couple of FAQ articles on tow bar wiring that should help in choosing the best light kit for your application along with how to go about wiring them.

For a braking system, the easiest to use and install would be the Roadmaster Even Brake Portable Proportional Braking System, # RM-9400. This system installs quickly so you are ready to go in minutes. It engages the towed vehicle brakes proportionally to how much the towing vehicle is braking, reducing wear of both vehicles brakes.

Finally, you will need to check with the manufacturer and/or your vehicle owners manual for instructions on the proper procedure for towing your vehicle because some vehicles must be equipped with a transmission lube pump, an axle disconnect, drive line disconnect, or free-wheeling hubs before they can be towed.

expert reply by: Michael H

0