bing tracking image
Customer Service My Orders
Q & A Icon

Comparison of Wiring Harnesses to Fit 2011 Jeep Liberty and Other Parts Needed to Tow a Trailer  

Updated 05/24/2017 | Published 05/22/2017



Question:

I see you have 3 different harness options. Is it just a brand thing or is one actually better than the other?

0

Expert Reply:

There are three trailer wiring harnesses that fit the 2011 Jeep Liberty. The Tekonsha # 118554, Curt # C56334, and a Hopkins # HM11142485.

All three provide a 4-way connector and install by plugging in behind both tail lights. There is also a hot lead wire that will be run to the battery and a fuse to be installed. Everything for the install is included with each harness. Then the connector will is stowed beneath the Jeep near the trailer hitch.

Of the three I recommend the Tekonsha because we have better luck with their converter boxes. Also, the price is a little nicer than the others.

If you don't already have a trailer hitch receiver on the Jeep I recommend the Draw-Tite # 75578. This is a Class III, 2 inch hitch receiver. I've linked an install video for you.

You'll also need a ball mount and hitch ball. I've attached link of our selection of ball mounts for a 2 inch hitch receiver as well as an article to help you determine the correct rise or drop you may need. Once you choose a ball mount you can then choose a hitch ball to fit it.

One way to make choosing a ball mount easier is to go with an adjustable ball mount like the B&W Tow & Stow # BWTS10038B. It features the ability to be flipped under the hitch when not using it and will provide up to 5-1/2 inches of rise or 5 inches of drop.

For a pin and clip to fit you can use # PC3 or if you'd like to have a locking pin you can use # BX8858.

I've also included links to some articles on towing that you might find helpful.

expert reply by:
0
Charles S
Ask The Experts a Question >>

Video/Article/FAQ this Question was Asked From

Article or Video
Q & A Icon

Continue Researching

See More Q&A Expert Answers >>