Recommended Class V Hitch For 1995 GMC K2500 6.5L Diesel
Updated 05/23/2017 | Published 05/21/2017
Products Featured in This Question
Question:
I am looking for a Class 5 Hitch to install on my 1995 GMC K2500 8 foot bed with a 37inch wide frame. What could you recommend?
asked by: Derek M
Expert Reply:
For your 1995 GMC K2500 with 37 inch wide frame, I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2" # C15325. This is a confirmed fit for your truck and is a heavy duty hitch rated for 2400 lbs tongue weight and 16000 lbs gross towing weight. With weight distribution, that towing capacity rating increases to 17000 lbs. These ratings may be higher than your truck capacities, so you will want to make sure to check your owners manual.
The distance from the mounting surface of the hitch down to the hitch tube is going to be 4-1/4 inches. If your truck has the standard bumper or step bumper, this hitch is confirmed to fit.
If you don't already have trailer wiring, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118315 for a standard trailer. This harness plugs into your wiring harness which is located beneath your vehicle along the driver's side frame rail. If you have a factory 7 way and want to replace it, I recommend the 7-Way Pre-Wired Car Connector, 7' Lead # 20023.
For a ball mount with that capacity, I recommend the Curt Heavy Duty Forged Ball Mount for 2" Hitches - 3" Rise - 4" Drop - 17,000 lbs # C45341. You can use a hitch ball like # 63840 for a 2-5/16 inch ball or # A-90 for a 2 inch ball with a 10000 lb capacity.
You may want to consider a locking hitch pin like # e98880 to secure your ball mount.
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2"
- Trailer Hitch
- For Towing
- Class V
- 2400 lbs TW
- 16000 lbs GTW
- 17000 lbs WD GTW
- 2 Inch Hitch
- 2400 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Best Trailer Hitch For 1993 Chevy C1500 Short Bed
- Q&A: Trailer Hitch Receiver Drop Heights For Tommy Gate Lift On a 1996 Chevrolet C2500 Pickup
- Q&A: Trailer Hitch for 2024 Motorhome on Ford F-53 Chassis With 700 lb Tongue Weight Rating
- Q&A: What Size Hitch Pin Hole does the B&W Pintle Hook Mounting Plate for 2" Hitches Have?
- Q&A: Recommended Class IV Hitch for a 2020 Ford F-150 Lariat w/a Factory Hitch
- Q&A: What Lock Kit Is Needed For My B&W Pintle Hitch?
- Q&A: Fit and Compatibility of Deep Drop Trailer Hitch for a M35A2C
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Article: Which RV Propane Tank Size Do I Need?
- Article: My Trailer Hitch Doesn't Fit
- Article: How Much Weight Can I Put on My Trailer Hitch?