Can HtdraStar EOH Adapter Be Attached To Wiring On Actuator Using Quick Splice Connectors

Updated 04/13/2017 | Published 04/11/2017

Question:

Hi First love eTrailer. Question regarding HBA CAM If I get a HBA cam for my Hydra star Fifth wheel trailer that is already installed in the heated cargo bay CAN i use a wiring tap connector to tap into the actuator for the blue and white wire. 18-24 gauge blue tap connector It would be very easy as the actuator is in a difficult place versus cutting wire wires and crimping. Since covered and warm no worry for the connections if outside of course would shrink wrap Thanks again for the good service and expert opinions and answers I cannot paste photo of the connector, to this message. But common for auto wiring lay solid wire in open and push in end of the other wire and close clam sheel and click shut. Hope explained correctly

asked by: Brian

Helpful Expert Reply:

I attached a link to an installation video for the # HBA-CAM you can check out.

At About the 6:25 mark on the video, the electrical connection is shown. As long as you have a solid connection between the Actuator and the # HBA-CAM, it would work.

expert reply by: Jeffrey L