Wiring for a 2017 Buick Encore and a 2007 Ural Retro to a 6-Pin Round Wiring Harness

Updated 03/21/2017 | Published 03/20/2017

Products Featured in This Question

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(16)

$74.46

10 Gauge Wire - Blue Primary - Per Foot

(108)

$1.65

Curt Tail Light Converter with 4-Way Flat Trailer Connector

(367)

$29.38

Ring Terminal - 12-10 Gauge Wire - 3/8" Ring ID

(75)

$1.86

Deka Heat Shrink Butt Connector - 12-10 Gauge - Nylon Insulation - Yellow - Qty 5

(1149)

$8.08

Question:

My trailer has a six pin round connector. Is this kit C56363 available in 6 pin round? I will alternate pulling a 350 lb trailer with two different vehicles. A 2007 Ural Retro motorcycle and sidecare, and a 2017 Buick Encore. Thanks.

asked by: Donny

Expert Reply:

To add a 6-Pin round connector to your vehicle you will need an adapter in addition to the wiring harness that you referenced.

For your 2017 Buick Encore the Curt T-Connector Wiring Harness # C56363 is where you'll need to start. The Next thing that you will need is the 4-Pole to 6-Pole Adapter # A10-6034VP. This will plug right into the 4-Way that you already have installed on your Encore. All you have to do at this point is add the extra wiring using 10 Gauge Wire # 10-1-1 in addition to any Ring Terminals # DW05705-1 or Butt Connectors # DW05745-5 that you might need.

For your 2007 Ural Retro you will need to use the Curt Circuit Protected Converter # C56175 along with the 4-Pole to 6-Pole Adapter # A10-6034VP, and any extra wiring # 10-1-1, Ring Terminals # DW05705-1, or Butt Connectors # DW05745-5.