Will Curt 2-1/2 Inch Reducer Sleeve Fit a 2016 Chevy Silverado 3500 with 2-1/2 Inch Hitch

Updated 03/17/2017 | Published 03/16/2017

Question:

I have a 2016 chevy Silverado 3500 . I purchased a Reese 2 1/2inch to 2inch receiver reducer sleeve and the 5/8inch trailer hitch pin would not line up. I need at least 2 1/2inch - 2 5/8inch from the center of the trailer hitch pin hole to the end of the pinch on the receiver reducer sleeve. Will the C45405 work?

asked by: Jason P

Expert Reply:

I went out to the warehouse to measure Curt reducer sleeve # C45405. From the center of the hitch pin back to the end of the shank is 2-1/2 inches. To the front of the shank is 3 inches. And to the stops at the front it is 2-5/8 inches. Based on this it does sound like it will work with your 2016 Chevy Silverado 3500.

expert reply by: Michael H