How To Determine What Size Replacement Spring Bars Are Needed For Equal-I-zer Weight Distribution
Question:
How do I know which replacement size to get? There are no markings on the hitch to indicate 1,000 lb or 1,400 lb. What are the dimensions of the bars for each size?
asked by: Jay
0
Expert Reply:
The easiest way to determine what replacement spring bars you need for your Equal-I-zer weight distribution system is to take a simple measurement.
Just measure the inside of the hole in the head where the spring bar is inserted. If it is 1-3/8 inch then the system is a 10,000-lb system with a 1,000-lb tongue weight. You would need part # EQ90-01-1099.
If the hole measures 1-1/2 inches it will be the 12,000 or 14,000 system that has a 1,400-lb tongue weight, and the replacement spring bars are part # EQ90-01-1499.
expert reply by: Jeffrey L
0
Products Referenced in This Question
Replacement Spring Bars for Equal-i-zer Weight Distribution Systems - Qty 2 - 1,400 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Spring Bars
- 1400 lbs TW
- Square Bar
- Equal-i-zer
more information >
Product Page this Question was Asked From
Replacement Spring Bars for Equal-i-zer Weight Distribution Systems - Qty 2 - 1,000 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Spring Bars
- 1000 lbs TW
- Square Bar
- Equal-i-zer
more information >
Similar Expert Q&A Pages
- Are Spring Bars on Equal-i-zer Weight Distribution System Interchangeable?
- Equal-I-Zer Weight Distribution is Too Stiff; Can Lighter Bars be Used in the Same Head
- What Size Socket is Used to Install Equal-i-Zer Weight Distribution Hitch Ball
- Recommended Replacement Spring Bars To Accommodate Lighter Trailer
- Replacement Spring Bars for 1,000 Pound Equal-i-zer Weight Distribution System
- What is the Width of the Equal-i-zer Replacement Spring Bars
- Dimensions of Equal-I-zer Spring Bars EQ90-01-1099
- Replacement Equil-i-zer 1,000 lb Tongue Weight Spring Bar Compatibility With 1,200 lb System Head
- Replacement Frame Brackets and Spring Bars for 10K Equal-i-zer Weight Distribution System
- Replacement Bars for an Equalizer Hitch, 14,000 to 10,000 Solution
- Replacement Spring Bars for Equal-i-zer Weight Distribution System With 1-1/4 Inch Wide Opening
- Upgrading the Equal-i-zer Weight Distribution System
- How To Upgrade from the 600 Lb to 1,000 Lb Equal-i-zer Weight Distribution System
- Replacement Equalizer Weight Distribution Spring Bar for 1,000 lbs Tongue Weight
- Are Equal-i-zer Spring Bars Interchangeable With Same Head Unit?
- Can You Switch Between 10K and 12K Equal-i-zer Weight Distribution Systems
- Replacement Spring Bar Recommendation for Equalizer System to Lower Rating for 4,700 lb Trailer
- Can Spring Bars of Equal-i-zer Weight Distribution System be Changed to Change Rating
- Are Replacement Weight Distribution Spring Bars Available as Single Bars or Pairs of Bars
- Replacement Spring Bars for Equal-i-zer 10,000 Lb Rated Weight Distribution System
- How to Select Weight Distribution System for Use with Multiple Trailers