How to Determine Which Electric Brake Assemblies Will Fit Tow Dolly 80T-14
Updated 02/22/2017 | Published 02/21/2017
Question:
Is there an electric brake system to add to a Master tow dolly Model 80T-14? Electric if possible. Backing plates, and drums.
asked by: Bill S
Expert Reply:
To determine the correct brakes to fit your tow dolly you'll need to pull the hubs off and find the inner and outer bearing numbers as well as the part number of your grease seal. I've attached a diagram showing you how you can find these numbers. If the numbers aren't available you can also measure the diameter of your spindles with a digital caliper, # PTW80157.
I've linked an article that may help you with the parts you'll need to add electric brakes to the dolly, as well as our selection of electric drum brakes.
Product Page this Question was Asked From
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Recommended Bearing Kit for a 3,500 lbs Axle on a Boat Trailer
- Q&A: How to Determine the Replacement Hubs for a 2002 Magic Tilt Trailer
- Q&A: Kodiac Disc Brake Kit Compatibility with UFP DB-42 Axle
- Q&A: Diameter of Spindle Washer # SW1000 and Wobble Roller Retainer Ring CE10981
- Q&A: How to Choose the Correct Size Trailer Winch For a Boat Trailer
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Will Installing Trailer Hitch on 2020 Nissan Murano Keep Hands Free Liftgate From Working
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Troubleshooting Trailer Bearings that Fit Almost Too Tight to Install
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Lighting Requirements