Lug Nuts/Bolts for Kenda K500 SuperTurf Tire with 8 White Wheel - 5 on 4-1/2 - Load Range B
Updated 02/15/2017 | Published 02/13/2017
Products Featured in This Question
Question:
Which lug bolt is required for this wheel, 60° or 90°?
asked by: Adam M
0
Expert Reply:
For the wheel in tire and wheel combo # AM89992 you will want to use 60 degree coned lug nuts or wheel bolts. Specifically you can use # CE11051 (sold in quantities of one). This is a 60 degree, 1/2" lug nut. A lug nut is a lug nut but I linked a video of it for you anyway!
For wheel bolts you can use # RG02-020 which is a set of 4 which are also 60 degree and 1/2".
I also linked a video on the tire and wheel combo.
expert reply by:
Michael H
0
Product Page this Question was Asked From
Kenda K500 SuperTurf Tire with 8" White Wheel - 5 on 4-1/2 - Load Range B
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range B
- 18/8.5-8
- 8 Inch
- K - 65 mph
- 5 on 4-1/2 Inch
- Steel Wheels - Powder Coat
- Kenda
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement 5.70-8 Tire and Wheels for Taylor Dunn Burden Carrier
- Q&A: Looking for Aggressive Mower Tire in Size 23x10.50-12
- Q&A: How To Send Constant Power to 12 Volt Pin On Trailer Connector On 2020 Ford F-350
- Q&A: Replacement Options for 20.5x8.0-10 Tires With 5 on 5-1/2 Bolt Pattern Wheel
- Q&A: Replacement for TDE LP85 Surge Brake Actuator
- Q&A: Is There a Trailer Wheel with a 5 on 4-1/4 inch Bolt Pattern
- Q&A: Wheel and Tire Compatibility with Toro Z4200 Riding Mower Rear Tires
- Article: Trailer Tire Sizing
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: How to Determine Tire/Wheel Diameter
- Article: Trailer Lighting Requirements
- Article: Best Bike Racks for Electric Bikes
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)