Parts Needed on a 2003 Jeep TJ to Tow a Trailer with Brakes

Published 01/26/2017

Products Featured in This Question

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(383)

$37.01

Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional

(2763)

$159.19

B&W Tow & Stow 2-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise - 10K - Black

(4612)

$239.00

Blue Ox Trailer Hitch Receiver Lock for 2" Hitches

(194)

$34.95

Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires

(3397)

$121.25

Question:

i am wondering if you sell a kit with trailer wiring harness,brake controller with controller harness my vehicle is a 2003 jeep tj, which controller would work best

asked by: DarylMcDonald

Helpful Expert Reply:

For your 2003 Jeep TJ you can use the wiring harness # 118409. This will provide you with a 4-way trailer connector. Then to add a 7-way use # ETBC7. The # ETBC7 will also include everything you need to wire your Jeep for a brake controller.

For a brake controller I suggest the Prodigy P2 # 90885. This is one of our best selling brake controllers ever because of how easy it is to use and how reliable it is. There isn't a custom wiring harness for your Jeep so it will need to be hardwired in. I've included a link that shows how to install the P2 along with the # ETBC7.

If you also need a ball mount the B&W Tow & Stow # BWTS10033B is an adjustable ball mount with two hitch balls. It'll provide either 3 inches of drop or 3-1/2 inches of rise. The best part about it is it will flip under the hitch for storage when not in use. If you'd also like a locking hitch pin you can use # BX8858.