Brake Controller Install Harness for 2016 Jayco Precept 29UR on Ford F-53 Chassis

Published 12/29/2016

Question:

I have a 2016 Jayco Precept 29UR on a Ford F53 chassis and need guidance on the correct wiring harness and if possible the location of the plug under the dash. It is pre-wired with a RV plug at the hitch so I am assuming there is a plug already under the dash somewhere. I see QandA for other models built on f53 chassis but not sure I can asume my would be the same. Thank You

asked by: Ron

Expert Reply:

For a 2016 Ford F-53 chassis the brake controller connector is located on the left side of the steering column support, as shown in the provided photo. You'll need the # 3034-P brake controller wiring harness.

For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking the tow vehicle is applying and applies a proportionate amount to the trailer brakes.

expert reply by: Jameson C