Diameter of Hub Face on TA88545-2
Published 12/22/2016
Question:
what size is the hub face 5.5 or 6.5 thanks
asked by: Russell
0
Expert Reply:
The diameter of the hub face is 5-1/2 inches on the # TA88545-2 that you referenced.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2 - Qty 2
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L44649 / L44649
- Standard Grade
- For 2500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- Timbren
more information >
Featured Help Information
Instructions
Continue Researching
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Q&A: How to Confirm Correct Size of Grease Seal
- Q&A: How Should the Grease Seal Fit to the Spindle
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Can The etrailer Trailer Axle with Idler Hubs # e65GR Be Mounted Below the Leaf Springs?
- Q&A: Replacement Seals And Hubs For Boat Trailer W/ 3500lb Axles And Oil Bath Hub and Rotors
- Article: Most Popular Wheel Bearings
- Q&A: Availability Of Trailer Hub With .75" Outer And 1.25" Inner Bearings
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Grease Seal For a Trailer Hub Using LM11949 Outer Bearing and LM67048 Inner Bearing
- Q&A: Replacement Hubs Needed for 1974 Boat Trailer with 5 on 4-1/2 Bolt Pattern
- Article: How to Measure a Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub