Will 3,500 Pound Trailer Hubs Fit 1,000 or 1,750 Pound Axle
Updated 12/20/2016 | Published 12/19/2016
Products Featured in This Question
Question:
I was looking at your 3500 lb hubs for 6 on 5.5 bolt pattern. What size spindle will these work on? I own a harbor freight axle, both their 1k and 1750 lb axle. I want to use the 6 lug hub and I am hoping that I do not need to buy an axle, but rather just the hubs. do you know if these are compatible?
asked by: Kyle
Expert Reply:
The 3,500 pound hubs # 84655UC1 use bearings # L68149 and # L44649 which are for a # 84 spindle. A # 84 spindle has the following measurements:
A 1.75 inches
B 1.73 inches
C 1.38 inches
D 1.06 inches
E 1.00 inches
If your current spindles have the same measurements and you currently have the same bearings these hubs will work for your trailer without getting a new axle.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Can I Use Hubs with 3500-lb Capacity on Axle with 1750-lb Capacity If The Bearings Match Up?
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Search Results: accu lube hubs
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 2.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Hub Assembly - 2,200-lb E-Z Lube Axle - 5 on 4-1/2 - 13" - 15" Wheels - Galvanized
- Shop: Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Stainless Steel
- Video: 3500lb Trailer Idler Hubs Direct Comparison
- Q&A: Recommended Timbren Axle-Less System with 5 on 5 Bolt Pattern Hubs for Overland Trailer
- Q&A: Difference Between Timbren Axless Suspension Systems T54KV and T99GR
- Article: Where to Position the Trailer Axle?
- Q&A: Recommended Suspension Setup For A Lightweight Offroad Trailer
- Q&A: How To Use Toyota TRD Pro 17 Inch Wheels With Hubs On a Dexter 3,500 Lb Axle
- Q&A: Compatible 6 Lug on 5-1/2 Inch Bolt Pattern Idler Hub and Total Drop of Timbren Axle-Less Suspension
- Q&A: Dexter Brakes With Parking Brake for Timbren Axle-Less Trailer Suspension
- Article: Trailer Wiring Diagrams
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Lighting Requirements
- Article: Curt Echo Full Review
- Article: How to Measure a Trailer Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)