Sink Strainers for Camco RV Drain Hose w/ Drain Trap and Evacuation Flange  

The Camco RV Drain Trap, part #CAM37262 is designed for 3/4 inch diameter drain hoses. The threaded inlet portion of the trap measures 1-3/4 inches at the threads as shown in the attached photo. If your drain hose is 3/4 inches in diameter I am sure…

The Camco RV Drain Trap #CAM37262 or #CAM37420 is designed to be used with a 1-1/2 inch - 11.5 threaded drain fitting. I recommend the Valterra Sink Drain with Strainer Basket #A01-2011VP or the LaSalle Bristol RV Drain with Strainer Basket - Metal -…

I contacted the vendor and verified that you do in fact need to use plumber's putty when installing the Sink Strainer w/ Push-In Basket for 2" Drain #37295325. The putty will go on the top side of the sink, in between the sink and strainer.…

The URL's you posted for for the same item so I'm assuming you meant to reference the Camco RV Drain Trap for 3/4" Diameter Drain Hose #CAM37262 and the Exterior Evacuation Drain Trap #37295195. Both of these drain traps are exactly the…

Hey James, so while we don't have a picture of the #KE33JR exactly yet I attached a picture that shows what the wheel looks like in a different size to give you an idea as its most likely you wanted to just see the wheel design.

The Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter #DM8550045 referenced in your question uses a coupler at the base to securely attach to a standard 2-5/16 inch diameter gooseneck ball. Top and side coupler bolts hold it in place so that…

Meg, for your Lippert Solera 2000 series awning you can use the Replacement Front Cover for Lippert Edge Awnings #LC32NJ for the front and #LC43UD for the rear to replace your damaged cover. Also, if by cap you're meaning the manual override…

We have the 2.5 inch version of the B and W Tow and Stow for MultiPro tailgates with part #BWTS20066BMP but at this time (May 2020) we are still waiting on the 2 inch version to be released.

Thank you for the photos and sorry to hear about your truck! The unique design of the B&W Tow & Stow 2-Ball Mount - Compatible with GM MultiPro Tailgate #BWTS20066BMP is that angled section that meets with the shank part of the ball mount. On…

Yes the Solera 16 foot Family Room part #LC362231 will fit your 16 foot Sunsetter awning as this was designed to fit the standard RV awnings like what you have.

You can wire a license plate light like part #LPL55CB without running wiring up to the front of the trailer. You simply attach the white wire with the ring terminal to a clean, bare metal surface like the trailer frame, and then attach the black wire…