Parts Needed to Flat Tow 2017 GMC Sierra 1500  

Question:

Expert Reply:

The Falcon tow bar has a maximum capacity of 6,000 pounds which is enough to tow your 2017 GMC Sierra 1500. If you feel like the Falcon is getting old and worn out and needs to be replaced I recommend going with the Demco Commander # DM9511012, which also has a 6,000 pound capacity. If you prefer a higher rated tow bar then go with the Dominator # DM9511008 rated up to 7,500 pounds. More than enough.

For either tow bar the base plate kit for your truck is # DM9519330. They're tabless so you can barely see them when you're not towing.

For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.

And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest systems to set up and use are portable systems, like the Blue Ox Patriot # BLU37TR along with the # RM-9332. It applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.

Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.

I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.

expert reply by: Jameson C

0