Transmission Cooler Recommendation for a 2000 Jeep Cherokee Towing a 2000 lb Snowmobile Trailer
Updated 11/23/2010 | Published 11/21/2010 >
Products Featured in This Question
Question:
2000 Jeep Cherokee 4door 4x4 I want to make sure that i get the right trans cooler for my jeep. I am adding a hitch so i can tow my 2000lb snowmobile trailer. I want to make sure my trans dosnt blow up climing the mountain. Can you advise me on the correct cooler for me. Also, i am concerned that it will not fit in front of the stock radiator, or constrict flow to the primary coolant ratiator for the engine to cause overheating, or force to to jurry rig an installation if the parts dont line up.
asked by: Dan E
Expert Reply:
The Derale Transmission Cooler, item # D13502, will be the correct cooler for your 2000 Jeep Cherokee 4door 4x4. This cooler will install in front of the vehicles radiator and air conditioning condenser and is 11 inches Wide x 7-1/4 inches tall x 7/8 inches deep. You should measure to make sure that there is room to install the cooler in this position before you order, but there should not be a problem.
You will need to determine how the cooler lines will splice into the transmission cooler return line on your vehicle. The 2000 Jeep Cherokee came one of two ways. You will need the Jeep OEM Custom Transmission Cooler Fitting Kit # HH41413. If you have 3/8 inch inside diameter hose you will need to use the Radiator Adapter Fittings for Dodge and Jeep, item # D13028. The only way to determine which application is right for your Cherokee is to physically check.
I have posted some information on selecting and installing transmission coolers and a video showing a typical transmission cooler installation for you to review.
Once you have checked the above items you will be able to select the correct fittings and determine the size of cooler you can use. If the # D13502 cooler is too large you can use the Derale Transmission Cooler, item # D13501, which is smaller and should work for you. The dimensions of this cooler are 11 inches wide x 5-3/4 inches tall x 7/8 inches deep.

Product Page this Question was Asked From
Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class III - Efficient
- Transmission Coolers
- Plate-Fin Cooler
- Mid-Size Truck
- SUV
- Van
- Standard Mount
- 11W x 7-1/4T x 7/8D Inch
- With 11/32 Inch Hose Barb Inlets
- Derale
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Frequently Asked Questions About Transmission Coolers
- Q&A: What do the Class Ratings Mean on the Transmission Cooler Pages
- Article: Transmission Cooler
- Q&A: What is the Correct Weight Ratings for 2024 Jeep Wrangler Curt Hitch?
- Q&A: Parts Needed to Tow Trailer with 2015 Buick Enclave
- Q&A: Trailer Hitch, Wiring, and Brake Controller for a 2007 Honda Odyssey
- Q&A: Recommended Transmission Cooler and Hitch for 2019 Kia Sorento LX V6 2WD
- Article: Performance Chips and Modules
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Can 11/32 Hose or Fittings be Used with 3/8 Inch Transmission Lines on a 2009 GMC Savanna 2500
- Q&A: Recommended Items to Flat Tow 2015 Buick Enclave Behind 2008 Winnebago Tour RV
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch