Prodigy Brake Controller for Use with Electric-Over-Hydraulic Brakes

Updated 11/07/2016 | Published 11/05/2016

Question:

Electric over hydraulic breaks. They work if you pull the trailer controller but dont when you use the foot pedal. Whats wrong? brand new 2016 Ford F350 with factory break control

asked by: Daniel B

Expert Reply:

A brake controller that is to be used with electric-over-hydraulic (EOH) brakes needs to have a setting for that type of operation. On a controller with this capability, like the Prodigy P3 # 90195, the OEH setting can be selected from the menu screen. Some factory controllers may not have the option for OEH operation so you'll want to check the instructions for your controller to see if/how it can be set for that operation.

If it cannot work with EOH actuators then you'll want to choose either the P3 or the Prodigy P2 # 90885, both of which will work fine with your actuator. To install either Prodigy you can use wiring adapter # 3034-P.

expert reply by: Adam R