Replacement Latch Wrench for Blue Ox Sway Pro Weight Distribution System

Question

Question:

Do you carry the Blue Ox Sway Pro wrench only? Go figure - I left mine on the trailer tongue and went camping. It is on the road somewhere in the PNW. thanks.

asked by: Bill G

0

Expert Reply:

For a replacement Rotating Latch Wrench for your Blue Ox Sway Pro weight distribution system like # BXW1000 you can use part # BLU94FR which is an updated version.

For reference I linked our main page for all Blue Ox weight distribution replacement parts.

expert reply by: Adam R

0

Answer 1

The Blue Ox SwayPro shank, part #BXW4001, measures 12 inches long from the hitch pin hole to the adjustment holes and it'll work just fine with the Curt system, part #C17341, you have. You didn't mention how much longer you need exactly this…

view full answer...

Answer 2

THe RoadActive Suspension Custom Leaf Spring Enhancement Kit part #RAS4611 that you looked at is a good option. It will not completely remove the sag but it does help. It also makes an improvement to the unloaded ride quality. Less body roll and and…

view full answer...

Answer 3

I have a solution for you, however, the Blue Ox Hitch Extender #BX88264 is is designed for hitch-mounted accessories or for flat towing only, not to tow a trailer. Your best option is to use an extra long weight distribution shank, like the Curt…

view full answer...

Answer 4

Most trailer jacks like the Lippert #LC285318 only use one wire. That wire provides the power and the assembly grounds through the mounting hardware of the jack. It's hard to tell what's going on with the electric tape and splice connector I…

view full answer...

Answer 5

I spoke with my contact at Lippert and he confirmed that the Lippert Components Power Tongue Jack 1817941 #LC285318 can be rotated to be best orientated for you. The jack can be un-bolted, rotated, and reinstalled.

view full answer...

Answer 6

Yes, we have exactly what you need. The Breaker Style Wrench for Blue Ox SwayPro Weight Distribution Systems #BLU94FR is a breaker style wrench that allows for safe and easy operation of the rotating latches on your Blue Ox SwayPro weight…

view full answer...

Answer 7

For a replacement wrench for cranking up the chain hangers of a Blue Ox SwayPro weight distribution system you'd want the part #BLU94FR.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Replacement Latch Wrench for Blue Ox Sway Pro Weight Distribution System

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching