Why Can't a 5th Wheel Trailer be Towed with a Slider Hitch Slid Back on a Ford F-150 5-1/2 Foot Bed
Updated 10/04/2016 | Published 10/03/2016 >
Products Featured in This Question
Question:
I recently went camping for the weekend and after placing my slider into the rear position to set up on my site- I forgot to slide it back into the forward position when I started back home. I have an F-150 4x4 5 1/2foot crew with trailer towing pkg. I got home and went to slide it back to park it and it was a funny feeling when I realized it was still in the rear position. It had towed fine without any noticeable differences around 100 miles with some pretty tough grades. trailer weight is around 8700 loaded and I was pulling an alum bass boat behind the trailer as well. Everyone says you cant do that but I wonder why really. They say it puts more weight toward the rear of the truck, Well to me it would seem that its not near as much as a bumper hitch pulling the same weight. what is the real answer?
asked by: DeeWayne
Expert Reply:
The issue is that the pin weight of the trailer would be too far behind the rear axle of the truck where the capacity is lower. A bumper pull trailer and 5th wheel are not really fair comparisons because tongue weight is almost always going to be lower than a 5th wheel's pin weight.
Things that can happen if the pin weight is behind the rear axle include reduced braking and steering ability and visibility issues, especially at night. The degree to which this is a problem various from truck to truck and trailer to trailer.
Oddly enough what probably helped reduce these effects on your rig was the fact that you had the tongue weight of the boat trailer pulling down at the back of the 5th wheel which likely lessened the pin weight of the 5th wheel. And just so you know you will want to check the state laws where you will be traveling because towing a trailer behind another trailer is illegal in some states.
What I recommend so that you don't run into any problems in the future is a hitch that slides automatically such as # DM8550040 which slides 22-1/2 inches and is ideal for trucks with 5-1/2 foot beds. Just something to think about if you ever want to replace your hitch.
Product Page this Question was Asked From
Reese Square Tube Slider for 5th Wheel Trailer Hitch - 10" Travel
- Accessories and Parts
- 5th Wheel Hitch
- Slider Parts
- 20000 lbs GTW
- Slider
- 10 Inch Fore/Aft Travel
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Replacement Head for a 30129 Pro Series 5th Wheel Hitch
- Q&A: Replacement Hitch Head Rated For 20K To Replace 16K Head on Reese 30047 5TH Wheel Hitch
- Q&A: Troubleshooting MaxxFan 4700 Series, 4700K
- Q&A: Recommended Replacement For Two Dometic 630035.331 RV AC Units
- Q&A: Options for a Roller Style Guide-On for a Pontoon Boat
- Q&A: Replacement Hitch Head for Reese Fifth Wheel Hitch 30056
- Q&A: Availability of 5th Wheel Head Assembly for a Reese 16K Slider
- Article: Guide to Choosing the Best Truck for 5th-Wheel Towing
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Ram Trailer Tow Prep Package
- Article: Fifth Wheel Installation Kit 30095 using adapter kit 58425


