Measurements of Brophy Light Duty D-Ring Tie-Down Anchor

Updated 09/12/2016 | Published 09/09/2016

Question:

Is this something you can quote? 1-1/2inch tie down ring, plain or zinc plated Ring ID 1-1/2, screw size is 1/4, the other dimensions are not critical and can be adjusted to work. The overall height of the ring is 1-3/8, with of the bracket is 1-1/4 and length is 1-5/8 but this can be changed. your number Code: SR10-C, appears like it would work but I dont see the the diameter of the wire the ring is made from.

asked by: Vikki E

Expert Reply:

I measured the Brophy Light Duty D-Ring Tie-Down Anchor # SR10-C and the diameter of the ring is 3/16 of an inch.

It's a 1-1/2 inch D-ring. The bracket measures 1-1/4 inches by 2-1/4 inches and the screw holes are 1-1/4 inches apart. I've attached a picture with the measurements for you.

expert reply by: Charles S