Fit and Compatibility of Brophy D-Ring Tie Downs for Transporting '67 Ford Sports Coupe Weighing 3K
Published 08/29/2016 >
Products Featured in This Question
Question:
Could I use 4 of Brophy Rope D-Ring Tie-Down Anchor - Bolt-On - 2-1/4inch Wide - Surface Mount - 1,600 lbs with grade 5 7/16 bolts to hold down my 67 ford sports coupe 3,000 lbs.
asked by: Terry
Expert Reply:
Yes, 4 of the Brophy # SS15-C Tie anchors can work to secure your 67 Ford Sports Coupe.
Tie-down anchors must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the anchors being used. For example, if you are using anchors # SS15-C anchors with a WLL of 1,600lbs each to tie down a load weighing 3,000 lbs, then you need at least 2 anchors to safely secure that load. It is recommended that you always use anchors in pairs.
It is also important to note that the capacity of the D-Ring is only as good as the structure that it is attached to. Be sure that the D-Rings are tied into the trailer's frame, not just the wood or sheet metal floor.
You will want to make sure you use a strap that is rated for this WLL capacity as well like the Bulldog Axle Ratcheting Tie-Down Strap # BDW20230.
I have linked the above mentioned products to this page for your viewing and purchasing convenience.
Product Page this Question was Asked From
Brophy Rope D-Ring Tie-Down Anchor - Bolt-On - 2-1/4" Wide - Surface Mount - 1,600 lbs
- Trailer Tie Down Anchors
- D-Rings
- Universal
- Stainless Steel
- 1600 lbs
- Bolt-On
- Folding
- Surface Mount
- Brophy
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Weight Distribution Hitch for 2026 Chevy Silverado 3500 Towing Brinkley Z Air 297
- Q&A: Are Trailer Leaf Spring Shackles Supposed to be Angled or Totally Straight
- Q&A: Protective Sleeve Recommendation for a Erickson Tie Down
- Q&A: How to Check Magnet Wear on Electric Trailer Brakes
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: Options For Replacing A Tie Down Turbo Lube 48394 Clear Oil Bath Cap
- Q&A: How to Find the Spindle Number on a Trailer Axle
- Q&A: Do Brake Magnets Need To Sit Perfectly Flat on Inside Armature Surface of Brake Drums
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: How to Measure for Trailer Hitch Drop
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: Determining Trailer Tongue Weight

