Recommended Transmission Cooler for 2003 Jeep Liberty with 3.7L V6 Engine
Published 07/20/2016 >
Products Featured in This Question
Question:
2003 Jeep Liberty 3.7 auto While off-roading in the Alps last week I was surprised to discover the transmission temperature warning light coming on during the long slow climbs up to 2,700m. The Land-Rover Defender, Mercedes G-Wagen nor the Toyota Land-Cruiser that were with me didnt have this problem. It has been recommended to me that I fit a significantly improved transmission fluid cooler. Which of your products is the best for this application. Regards
asked by: Gavin L
Expert Reply:
Since aftermarket transmission coolers are not vehicle-specific, you can install as large a secondary cooler as you have space to mount one. The ideal installation point is in front of the A/C condenser where the cooler will receive maximum air flow, and hence be able to deliver maximum cooling efficiency.
For the 3.7L V6-equipped 2003 Jeep Liberty you can use Derale transmission cooler # D13503 or one of the other units shown on the linked page. I linked an installation video for this cooler in a similar Jeep vehicle. The two linked articles will also be of value to you.
You will install the cooler on the transmission return line; this is the line that returns fluid back to the transmission after it has been routed through the primary cooler inside the radiator. To identify it, start the cold engine and shift it into gear for 15 seconds the shut off the engine. The return line will be the cooler of the two external transmission lines.
If you prefer a fan-powered cooler that can be mounted elsewhere in the engine compartment and that will cool your transmission fluid even at low speeds, then you might consider a unit like # D13900 or one of the similar fan-powered coolers shown on the other link.
Product Page this Question was Asked From
Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class III - Efficient
- Transmission Coolers
- Plate-Fin Cooler
- Mid-Size Truck
- SUV
- Van
- Standard Mount
- 11W x 8-3/4T x 7/8D Inch
- With 11/32 Inch Hose Barb Inlets
- Derale
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Recommended Hitch, Wiring, Brake Controller, and Transmission Cooler for a 2006 Honda Pilot
- Q&A: Transmission Cooler Recommendation for 2018 Nissan Frontier
- Q&A: Best Transmission Cooler For 2007 Honda Pilot 4WD
- Q&A: Does The Redarc RED82CR Come With The Switch Panel For A 2008 Toyota Tacoma?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Recommended Transmission Cooler for a 2018 Nissan Altima
- Q&A: Weight Distribution Replacement Solution Reese Mini 350 with Lost Components
- Q&A: When To Use a Weight Distribution System When Towing with a 2011 Honda Odyssey
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Frequently Asked Questions About Transmission Coolers
- Article: My Trailer Hitch Doesn't Fit
- Article: Timbren Suspension Enhancement Systems


