Will a Titan Disc Brake Assembly Fit a Heartland Cyclone and HBA-16 Electric Over Hydraulic Actuator
Published 07/12/2016
Products Featured in This Question
Question:
Can i install this disk kit to a Heartland cyclone 4018 2015 with HBA-16 actuator?
asked by: Cristian G
0
Expert Reply:
Titan disc brake assembly # THRCM13378DACEK will fit your trailer if the existing hubs use inner bearing 25580 and outer bearing 14125A and if the wheels have an 8 on 6-1/2 bolt pattern. They are compatible with the HBA-16 electric over hydraulic actuators such as # HBA16.
If you have different bearing numbers or wheel bolt pattern let me know and I can see what else we have that can work.
expert reply by:
Michael H
0
Product Page this Question was Asked From
Dexter Disc Brake Assembly - 13" Hub/Rotor - 8 on 6-1/2 - Dacromet - 7,000 lbs
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 8 on 6-1/2 Inch
- Hub and Rotor
- 7000 lbs Axle
- 16 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Best Replacement Brakes for a 7,000 lbs Axle
- Q&A: Will Dexter Brake Assemblies Fit on a Lippert Axle
- Q&A: Can I Swap Out Kodiak Rotors w/ DeeMaxx Ones?
- Q&A: Can I Replace a UFP A-70 Surge Brake Actuator w/ the Replacement Inner Member for Dexter DX7.5L?
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: How To Determine the Correct Replacement Trailer Hub Assembly
- Q&A: Bearing Kit For Curt/Lippert 7,000 lb Trailer Axle
- Article: Adding Electric Over Hydraulic Disc Brakes
- Q&A: Replacement Caliper Solution for Tie Down Engineering 46304
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer