Distance Between Mounting Holes that Secure PA-1 to Shank

Question

Question:

see picture, need distance between channel mount holes

asked by: Steven

0

Expert Reply:

The distance between the two holes you are looking for is 2-1/2 inches. This # PA-1 is designed to attach to a weight distribution shank that has 1-1/4 inches between the mounting holes. I added the dimension to the picture you submitted.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The interior channel width of the Curt adjustable ball mount part #C45900 that you referenced is 3 inches.

view full answer...

Answer 2

Hey Ed, I wish we carried a solution that would work for you but at this time we do not have any hitches that fit your 2004 Ford Explorer as everything we carry is designed to fit below an installed OEM hitch. Since yours is gone you'd want to…

view full answer...

Answer 3

Hi Ricky! Can the Blue Ox Adjustable Ball Mount with Clamshell for 2" Hitch - 7" Drop/Rise #BLU84HR be trimmed? Yes, but with a few caveats. First, you will void the warranty. Second, depending on your experience with doing this kind of…

view full answer...

Answer 4

For the Reese Weight Distribution Shank, part #RP3214, the overall length of the vertical shaft is 8-3/4", and the top of the horizontal shaft to the bottom of the vertical one is 7-1/2". I've linked to a video review of this shank for…

view full answer...

Answer 5

Most pintle hooks use a standard bolt pattern which is 3-3/8" horizontally center to center and 1-3/4" vertically center to center (see photo). Therefore, the Pintle Hook part #C48231 would be a direct fit and work well for you. It also…

view full answer...

Answer 6

Joe, the WS Aero Hitch 6" Drop Hitch w/ 2" Shank #WS67MR is available with a 4" #WS54UR, 10" #WS42RR, and 8" #WS45RR drop length.

view full answer...

Answer 7

The Curt Rebellion XD Shock Absorbing Adjustable Ball Mount w/ 2" and 2-5/16" Balls - 15K #C45949-22516 does have the ability to utilize a pintle hitch. The Curt Pintle Mount Attachment for Rebellion XD Adjustable Ball Mount #C79FR can be…

view full answer...

Answer 8

Yes, you can use a pintle hook with any of the Curt Rebellion XD Shock Absorbing Adjustable Ball Mounts like part #C83WR. You'd simply need the Curt Pintle Mount Attachment part #C79FR and any standard pintle hook like the Curt SecureLatch Pintle…

view full answer...

Distance Between Mounting Holes that Secure PA-1 to Shank

Product Page this Question was Asked From

Continue Researching