Is Curt Class III Trailer Hitch for a 2006 Jeep Grand Cherokee Rated for Weight Distribution

Updated 04/27/2016 | Published 04/23/2016

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

(260)

$183.55

2-5/16" Hitch Ball for Equal-i-zer Weight Distribution Systems - 10,000 lbs

(234)

$33.13

Fastway e2 Weight Distribution w/ Sway Control - Round - 6,000 lbs GTW, 600 lbs TW

(182)

$550.00

Question:

I have a 2006 v8 jeep grandcherokee , I bought curt class 3 bumper receiver, is this receiver ok to put a weight distribution hitch on it ? E2 6000 model?

asked by: Aaron L

Expert Reply:

Curt Class III trailer hitch # 13251 for the 2006 Jeep Grand Cherokee is rated for use with weight distribution. When used with weight distribution the gross trailer weight capacity is 5,500 pounds and the tongue weight capacity is 550 pounds. You would need to stay within that limit or within the capacity of the vehicle, whichever is lower.

You can use a weight distribution system that is rated for 600 pounds tongue weight such as # FA94-00-0600 or # FA92-00-0600 but will be limited to the 550 pounds tongue weight of the hitch or the capacity of the vehicle, whichever is lower.

Either of these weight distribution systems will need a ball, # EQ91-00-6100 for a 2-5/16 inch, but come with everything else. I have included some helpful links on weight distribution and determining tongue weight for you.

expert reply by: Michael H