bing tracking image
Q & A Icon

Getting Integrated Brake Controller On 2014 GMC 3500 to Work w/ Electric Over Hydraulic Brakes  

Updated 03/02/2016 | Published 03/01/2016

Question:

2014 GMC 3500, ITBC, wont work with my Mobile Suites 36TK3, was in a bind so I did the in line electric brake magnet fix, resolved the not recognizing problem and brakes work but very, very slow to respond, feels like 10 seconds, will the HBA-CAM resolve the delay issue Im having ?

0

Expert Reply:

The problem lies in the fact that your ITBC isn't compatible with Electric Over Hydraulic braking systems. If you're using the Hydrastar Electric Over Hydraulic Brake Actuator, the # HBA-CAM Adapter Module will improve your braking performance to a degree, but keep in mind that the Adapter Module is doing much the same thing as the old 'brake magnet trick' you referred to, which is fooling the electronics of the system into thinking an electric over hydraulic compatible brake controller is being used. Both solutions are essentially a 'work around' to get two systems that aren't meant to work together to work together. When you consider how important a correctly functioning braking system is, a 'work around' isn't the best option.

For maximum reliability and best performance, we recommend using an aftermarket brake controller that's electric over hydraulic compatible right out of the box like the Tekonsha P2, part # 90885. I've linked you to an FAQ article that shows how to install an aftermarket EOH-Compatible brake controller on a GM full sized truck that's equipped with the ITBC.

expert reply by:
0
Mike L

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>