Dimensions of Curt Hitch C11372

Updated 02/24/2016 | Published 02/23/2016

Question:

My car is a 2006 Lexus GS 450h and is not listed for this bar, however I think the car looks identical to the GS 350 in your video, and the silencer box hanging brackets are the same, but to be sure it will fit I would be grateful if you could tell me the width of the bar from left to right rear fixing holes. Thanks.

asked by: Matt

Helpful Expert Reply:

I was able to go out to the warehouse and take a few measurements for you on the hitch. I have linked an image for better clarity of the measurements for your convenience.

The center to center of the outer holes is 37-1/2 inches.
The center to center of the inside holes is 35-1/2 inches.
the top two holes are 2 inches apart.
the top two holes are 1-7/8 inches from the rear most hole.

Because this trailer hitch has not been testing on this vehicle there is no way to determine fitment or if the capacity of the hitch will be the same as on the GS350. You will be ultimately be limited to the capacity of your vehicle which will be listed in your owners manual or the placard on your driver's door frame.

expert reply by: Jackie C