Straight Shank Ball Mount Recommendation For a 1/2 Inch Drop

Published 02/05/2016

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

(525)

$231.93

Curt Tri-Ball Mount - 3 Chrome Balls - 10,000 lbs

(34)

$69.51

Question:

with a 1/2inch drop measurement, what is better, a 2inch drop or a straight in ball mount. can i washer up the ball to get closer to the 1/2inch . I will be towing a 1300# popup trailer behind a toyota tacoma access cab 2 wheel drive. The trailer frame is 11 1/2inch from ground when level. Thank you.

asked by: Les

Expert Reply:

In this instance, I recommend using a ball mount with a straight shank, like the Curt Tri-Ball Mount # C45001. Once the trailer is coupled to the ball, the tongue weight of the trailer will pull down a bit on the truck and you will be near the 1/2 inch drop you measured.

The # C45001 offers a 1-7/8 inch hitch ball, 2 inch hitch ball, and 2-5/16 inch hitch ball. The ball mount has a capacity of 10,000 pounds with the 2-5/16 inch hitch ball.

We do not recommend using washers to raise the hitch ball.

expert reply by: Victoria B