Grease Seal 3504 Replacement Availability
Updated 01/22/2016 | Published 01/21/2016
Question:
Im hopeful you can point me to a replacement grease seal. The part # on it is 3504 made in the USA!. It has an inner dimension of 50mm 1.9685 and outer of 66mm 2.598. The seal itself is about 5mm. I believe its a single lip, but anything that will fit will due. Thank you.
asked by: Jason
Expert Reply:
The closest seal we have to the dimensions you listed is the part # 10-40. This seal has an inner diameter of 1.938 inch and an outer diameter of 2.510. If you remeasure the seal you might find out that this seal would work, but if the numbers you listed are exact then this would be close, but not close enough.
For the inner diameter it might be better to measure the outer diameter of the spindle the seal rides on.
Product Page this Question was Asked From
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Single Lip
- 1.94 Inch I.D.
- 2.51 Inch O.D.
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement for Dexter Mobile Home Axle Grease Seal 10-41
- Q&A: Recommended Electric Over Hydraulic Conversion for Dutchmen Voltage 3818 Toy Hauler Triple Axle
- Q&A: Can Different Weight Capacity Axles 7K and 9K Be Used On a Tandem Axle Trailer?
- Q&A: Availability Of 2" Long 1/2" Wheel Stud With 0.56" Spline
- Q&A: Recommended Trailer Hitch Receiver For 1999 Ford F-350 W/ Deep Drop Bumper
- Q&A: Mounting Flange to Top of Crossbar Dimensions for Curt 15410 Class V Trailer Hitch
- Q&A: Repair Kit for Ram Series 12000 Trailer Jack
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Lighting Requirements
- Article: Trailer Tire Sizing
- Article: How to Measure for Trailer Hitch Drop