Parts Needed to Flat Tow a 2008 Jeep Wrangler Unlimited  

Question:

Helpful Expert Reply:

For your 2008 Jeep Wrangler Unlimited you would need to first start with a base plate kit confirmed to fit the vehicle. For that you would want the part # 1429-1.

In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon 2, # RM-520. For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground.

For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.

And finally, most states now require supplemental braking in the vehicle being flat towed. The best systems to use for motorhomes with air brakes like your Winnebago Horizon is the Air Force One # SM99243.

Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.

I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.

Pricing is below at the product links.

expert reply by: Jameson C

1