Dimensions of the Bearing Seal # 1105-100-035
Updated 01/12/2016 | Published 01/10/2016
Question:
Im looking at some seal # 1105 100-035. CAN YOU TELL ME WHAT THE HEIGHT OF THE BERING SEAL IS. Thanks
asked by: Chris L
0
Expert Reply:
The seal part # 1105-100-035 that you referenced has an inner diameter of 2.00 inches, an outer diameter of 2.875 inches and is .3 of an inch in thickness.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Single Lip
- 2.00 Inch I.D.
- 2.88 Inch O.D.
- Redline
more information >
Continue Researching
- Video: Ultimate Overview of the Grease Seal
- Video: Review of the Unitized Oil Seal for Trailer Hubs
- Q&A: Replacements For Hadco Trailer Axle With Hadco 3109 Hubs
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Shop: Double Lip Seal for 3,700-lb Marine Hubs
- Shop: Unitized Oil Seal for Trailer Hubs
- Shop: Grease Seal - Double Lip - 2.250" ID - 3.376" OD - GS-2250DL
- Shop: Grease Seal - Double Lip - Inner Diameter 1.68" - Outer Diameter: 2.33" - Qty 1
- Shop: Grease Seal - Double Lip - 2.125" ID - 3.376" OD - Qty 2
- Shop: Grease Seal
- Q&A: Can You Use Either the 23-180-181 or 23-105-106 12 Brake Kit & What Bearing Kit Do I Need
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Q&A: Need 8-Lug Brake Drum For 2005 Keystone Montana
- Q&A: How to Confirm Correct Size of Grease Seal
- Q&A: PullRite SuperGlide Quick Connect Capture Plate for Trailair Air Ride Pin Box
- Q&A: Trailer Hub that Fit Axle Spindle that is 1-1/16 inch In Diameter for Both Bearings
- Q&A: Grease Seal Recommendation to Replace AD2527E
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Most Popular Wheel Bearings