Distance Between Mounting Studs for the Kenda 4.80/4.00-8 Bias Trailer Tire # AM30000
Updated 01/11/2016 | Published 01/10/2016
Question:
Please can you advise the distance between the stud holes? will this wheel/tyre fit every 4 stud hub? regards
asked by: Mike D
0
Expert Reply:
The wheel bolt pattern of the Kenda 4.80/4.00-8 Bias Trailer Tire # AM30000 that you referenced is a 4 on 4 inch bolt pattern. That means that when measuring across the center of the wheel the lugs holes are 4 inches apart.
I attached a picture that shows this dimension.
Not every 4 bolt wheel is going to match up with this, but this is the most common 4 lug bolt pattern so most will.
expert reply by:
Jameson C
0
click to enlarge
Product Page this Question was Asked From
Kenda 4.80/4.00-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range B
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range B
- 4.80/4.00-8
- 8 Inch
- K - 65 mph
- 4 on 4 Inch
- Steel Wheels - Powder Coat
- Kenda
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Recommended Replacement Weld on Trailer Jack for a Phoenix Boat
- Q&A: Which is Better for Highway Use 4.80-12 or 5.30-12 Trailer TIres
- Q&A: Recommended Replacement Wheels/Tires for 1985 Coleman Tent Trailer
- Q&A: Recommended Higher Speed Rating for 4.80/4.00-8 Trailer Tires on Small Trailer
- Q&A: Interior Depth of Lipper SolidStep when Folded Up
- Q&A: Replacement Hub for 1" Straight Spindle on Boat Trailer
- Q&A: Trailer Tires Sizes Compatible with 8 x 3.75 Trailer Wheel
- Article: How to Measure a Trailer Axle
- Article: Trailer Tire Sizing
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How Much Solar Power Do I Need For My RV?
- Article: How to Measure for Trailer Hitch Drop
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)